1  KIT NAME:

     VSI-I64VMS-SAMBA-V0102-ECO1C-2

2  KIT DESCRIPTION:

     2.1  Installation Rating:

     INSTALL_3 : To be installed on systems running VSI TCP/IP for OpenVMS
                 v10.5 and CIFS for OpenVMS v1.2 ECO1.

     This patch is compatible with systems running other TCP/IP products 
     such as TCP/IP Services for OpenVMS, Multinet, or TCPware.


     2.2  Requirements:

     This kit should be installed only on systems running HPE CIFS for 
     OpenVMS v1.2 ECO1 or VSI CIFS for OpenVMS v1.2 ECO1C.  To display the 
     installed version, execute the following command:

     $ PRODUCT SHOW PRODUCT SAMBA

     A reboot is not required.  

     If you previously installed CIFS patch set PS2_14, you may apply
     VSI-I64VMS-SAMBA-V0102-ECO1C-2 on top of PS2_14.

     If you have not installed CIFS patch set PS2_14 but intend to do so,
     install VSI-I64VMS-SAMBA-V0102-ECO1C-2 after installing PS2_14.


     2.3  Version(s) of OpenVMS to which this kit may be applied:

     VSI OpenVMS Version 8.4-* for Integrity Servers


     2.4  New functionality or new hardware support provided:

     Adds support for VMS Software Inc. TCP/IP for OpenVMS v10.5. 


     2.5  Files replaced by this patch:

     Directory SAMBA$ROOT:[BIN]

     SAMBA$COMMON_SHUTDOWN.COM
     SAMBA$COMMON_STARTUP.COM
     SAMBA$CONFIG.COM
     SAMBA$MANAGE_CIFS.COM
     SAMBA$REMOVE_CONFIG.COM
     SAMBA$SMBD_SETUP_TCPIP.COM
     SAMBA$SWAT_SETUP_TCPIP.COM
     SAMBA$SWAT_SHUTDOWN.COM
     SAMBA$SWAT_SMBD_SHUTDOWN.COM
     SAMBA$SWAT_SMBD_STARTUP.COM

     Directory SAMBA$ROOT:[SYSUPD]

     SAMBA$RUN_CLEANUP_PROCEDURE.COM


3  INSTALLATION INSTRUCTIONS

     3.1  Compressed File

     This kit is provided as a self-extracting ZIPEXE kit.  To extract
     the kit files, execute the following command:

     $ RUN VSI-I64VMS-SAMBA-V0102-ECO1C-2.ZIPEXE

     3.2  Installation

     CIFS must be shutdown, cluster-wide, if applicable, to complete 
     these procedures:

     $ @SYS$STARTUP:SAMBA$SHUTDOWN
  
     Install this kit with the following command:

     $ @VSI-I64VMS-SAMBA-V0102-ECO1C-2

     The procedure will ask if you wish to rename files being replace 
     to *.COM_OLD.  To rename the files, enter Yes or press Enter.  To
     delete the files replaced by this kit, enter No.

     3.2.1  Post-installation requirements

     Run the CIFS configuration procedure to define the SMBD and/or
     SMBD445 services in the VSI TCPIP services database.  In a 
     cluster with CIFS running on systems with separate system 
     disks, complete these steps on one cluster member that boots 
     from each applicable system disk:

     $ @SAMBA$ROOT:[BIN]SAMBA$CONFIG

     From the main menu, select option 3 - System specific setup.

     Select option 2 - File server client capacity.  Set a new value;  
     the new value can be any value other than the current value. 

     When the menu is displayed again, press Enter to indicate Done.

     Exit SAMBA$CONFIG and start CIFS:

     $ @SYS$STARTUP:SAMBA$STARTUP


4  COPYRIGHT

     (c) Copyright 2018 VMS Software, Inc.

     VMS SOFTWARE, INC. CONFIDENTIAL. This software is confidential
     proprietary software licensed by VMS Software, Inc., and is not
     authorized to be used, duplicated or disclosed to anyone without
     the prior written permission of VMS Software, Inc.